Introduction

This is a highly concentrated, industrial strength, rinsing additive. It has been formulated to be used through a dosing unit, typically associated with this type of product. When used in conjunction with SUPERDISH-H, we guarantee streak free results.

Advantages

• Safe for use on all machines
• Low foaming
• Spot free rinsing
• Biodegradable
• Highly concentrated
• Very economical
• Easy dosing
• SABS 1828 MARK BEARING

Physical Properties

Foaming ability             :           low foaming

S.G                             :           1.02

PH                              :           8.0-9.0

Colour                         :           no colour

Odour                          :          Slight alcohol

Heat Stability               :           Recommended for use between 20°C and 90°C.

Method of Application

 For automatic dishwashers:

Pre-set the dosing unit to dilute at a rate of 1:5,000. In the unlikely event that optimal results are not achieved at this rate, the dilution rate may be lowered. To achieve maximum results, ensure that RINSE AID-H is used in conjunction with SUPERDISH-H.

ALWAYS ENSURE THAT ALL PRODUCTS ARE RINSED FROM ALL FOOD CONTACT SURFACES

Toxicology and First Aid

Keep out of reach of children.  Wear gloves, protective clothing and face/eye protection.  Avoid eye contact - if it occurs - wash immediately and seek medical attention if necessary. Avoid inhalation -  artificial respiration and oxygen may be required in severe cases.  Avoid skin contact, wash off with copious amounts of water and remove contaminated clothes.  Ingestion – DO NOT INDUCE VOMITING, give milk or large quantities of water.

The recommendations herein are based on laboratory tests and in field use experiments.  To the best of our knowledge these are accurate and since conditions of actual use are beyond our control, all recommendations are made without any warranty whatsoever.